how to secure a dildo without a suction base

Gosh, I’m so excited to tell you about my recent project – securing a dildo without a suction base. It was definitely a challenge but, gee whiz, I was determined to make it work.

So first I did a bit of research into what kind of adhesive would be best suited for this project. I found that I needed something that was strong enough to hold it in place without slipping, but also something that was non-toxic and would not ruin the material. After experimenting with several options, I settled on a special adhesive specifically designed for the purpose.

Next, I used a flat, dust-free surface to make sure the adhesive adhered properly. I also used a clean cloth to wipe away any dust that may have accumulated from the surface.

The next step was to carefully position the dildo on the surface. This was difficult as it required me to ensure that the adhesive would have an even spread and hold the dildo in place without slippage. I took my time and used a leveler to make sure the dildo was positioned properly.

With the dildo properly positioned, I applied the adhesive in a thin layer. As instructed, I gave it approximately 30 minutes to dry before testing. It held fast, so from there I applied a thicker layer and sex toys waited the allotted time for it to dry completely.

After double-checking that everything was secure, I gave it one final test on a flat surface, and voila – my dildo was secured without a suction base! I was extremely pleased with the result; the dildo was held safely and securely in its position, without any risk of slipping or sliding.

At this point, I started to think about other ways I could secure a dildo if I didn’t have an adhesive or a suction base. Of course, the answer was – handcuffs! Yes, I’m serious, I’m actually talking about handcuffs (or zip ties, might also work). Sure, it might seem a bit extreme, but they would definitely hold the dildo securely in place.

Another option I thought of was to use rope or string to tie the dildo down. This also seemed like a sensible option if you had some left over rope or twine, and it would undoubtedly keep the dildo securely in place.

I then looked into the possibility of using Velcro. It seemed like a good idea at first, but it was difficult to find solid evidence about how well it would actually hold the dildo in place. If I could have found an appropriate. Velcro, then I would have probably gone ahead with it.

At the end of all my research, I was happy to find that I had been successful in securing my dildo without a suction base. The adhesive had done the trick and held everything in place. It was a satisfying success!

Now, I started to think about other scenarios in which adhesive might be a suitable solution. For example, using a special adhesive to hold a vibrator in place would be another interesting option.

I also thought about how adhesive could be used to secure objects, vibrators such as toy cars, dolls, figurines, etc, to a flat surface. If you wanted to create a 3D landscape in which your toys could move and explore, this might be a good option.

Finally, I began to think about ways in which I could use adhesive to secure something to a vertical wall. This could be a particularly useful option for people who want to create a permanent exhibit in the form of a single picture or series of images.

Overall, my project to secure a dildo without a suction base was challenging but ultimately successful. It opened my eyes to the idea of adhesive and all the ways I could use it. So if you’re looking for a reliable and non-destructive way of securing a sex toy, heading to the craft store is definitely worth a try.